CHEVALIER Model: FBL-510C MC

Capacity
Swing Over Bed: .................................   44.70”
Swing Over Cross Slide .......................   32.12”
Maximum Turning Diameter: ...............   34.6”
Maximum Turning Length....................... 41.3”
Distance between Centers...................... 41.3”
Headstock
Spindle Nose..................................... A2-20
Through Spindle Hole Diameter.......... 12.5” (C)
Spindle Speeds.................... 500 rpm
Spindle Motor....................... 60 HP
Transmission............ C model: 3-speed Gear
Maximum torque....... C model: 4,135 NM@104 rpm
Turret
Turret Tools................ 12Live Station....................... 12
Transmission............. Bi-directional servo indexing
Index Time................ 0.35 sec
Clamping way............ Hydraulic clamp with curvic coupling
Clamping pressure......15,188 kgf
OD Shank.................. 1.25”
Diameter of Boring Bar.2.5".STD / 3.0” opt
Live Holder................. BMT 85
Live Tooling Power....... 15 HP
Live Tooling Maximum Speed.... 3,000 RPM
Travel
X Axis........................ 20.76”
Z Axis........................ 41.3”
C axis......................... 360 degrees w/ 0.001 minimum intervals
Feed motor X Z Axis.......... 9.4HP
X Z Axis Rapid Feed rate....394/472ipm
Tailstock
Control............ Programmable position / quill
Travel (w/o Steady Rest).......... 41.3”
Quill Travel.............................. 3.94”
Quill Diameter......................... 7.87
Quill Taper.............................. MT6
Rotary Quill
General Information
Slide way Slant............. 45˚
Coolant Pump................ 1.6HP/ 90 PSI
Machine Dimensions w/ conveyor (LxWxH)..................... 260“ x 117“ x 99.6“
Machine Weight........... 33,000 lbs

Investment Cost
Model: FBL-510C MC Fanuc 0i-TD control, 60HP 500rpm spindle motor, 3-speed gearbox, A2-20 spindle nose, 12.5” spindle bore diameter, Servo BMT-85 12-station live turret, full C axis, 220V/230V power
Base Price        $ 356,640.00

Options in this machine:

Item	Description	QTY		Price
1.	Radial (X axis) live holder with ER50 collet chuck	1		5,100.00
2.	Axial (Z axis) live holder with ER50 collet chuck	1		5,800.00
3.	A2-20 32” Manual 4-Jaw chuck with 12.5” bore”	1		11,000.00
4.	C Type Manual Steady Rest (clamping range up to 230-400 mm, maximum par load: 2.5 tons)	1		9,000.00
5.	150 PSI high pressure coolant	1		1200.00
Grand Total			$ 388,740.00